Our stainless steel Pan-Ring burner kits come complete with everything you need to start your outdoor fire pit project.
We start with 304 stainless steel so your burner will remain trouble free in the outdoors. The burner tubes are inserted into the adjoining tube then welded for unrestricted gas flow. All of our flame holes are precession drilled not punched so there are no tabs pushed inside restricting gas flow. By using our stainless steel Burner Pan-Rings with our stainless steel burner rings mounted on a stainless steel pan you have a corrosive resistant protective solid flat surface to work with. Best of all you can pour our fire glass crystals over the top of the pan-ring and it will not sift its way down into your lava rock.
Our NEW DELUXE connection kit has been assembled using matching components to assure the best performance i.e. 2 Non-Whistle flex lines, high-flow keyed main shut off ball valve and another 1/4-turn shut off valve to connect to your incoming gas line. With this second shut off you can connect and disconnect your burner system without having to shut your gas off at the source. All this adds up to exactly what you are looking for; the highest possible flames with the most complete and easiest kit to install your burner.
Please note, your incoming gas line size needs to be matched to the size of your burner. On average you will need a 1/2 inch line for 18, 22, 30 inch pan-rings. The 36, 40 inch pans will most likely require a 3/4 inch gas line. These are general guidelines and not meant to be used as suggested gas line sizes; you will need to consult your installer for the exact size of line needed. We always recommend that all gas products be installed and serviced by professionals that have been certified by the NFI or WETT. The installer must conform to any and all State and/or local codes.
Make sure this fits by entering your model number.
#1 Selling Fire Pit Pan/Ring Burner Brand for Contractors and DIY Builders. Our Most Complete Kit Ever!
36″ Stainless Steel flat pan with a 30″ High Capacity Stainless steel burner ring, 3/4″ connection hub with approximately 300,000 BTU’s and all 100% 304 stainless steel!
Our Most Complete Kit Ever Offered! 3/4″ High Capacity Keyed Chrome Shutoff Ball Valve, TWO High Capacity 3/4″ Non-Whistle flex lines, Push Button Igniter, all connection fittings and now our Installation Flange Kit to support our pan/ring burner in your fire pit.
Our supplied keyed ball valve comes with an 8 inch extension and 8 inch key, allowing for easier installation in a block fire pit! We supply a heavy-duty face plate for the chrome face ball valve and push-button ignition to be mounted in!
The supplied 16-gauge 404 stainless steel flange can be mounted to the interior wall with cement screws to easily and firmly support our burner pan/ring.